Preliminary Work; Heater Unit Installation Location - Webasto Thermo Top E Installation Instructions Manual

Preliminary Work

WARNING!
- Open the fuel tank cap, ventilate the tank.
- Close the tank cap again.
- Disconnect the battery "earth" or "ground" connection.
- Depressurize the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Completely remove the battery
- Remove the wiper arms
- Remove the coolant reservoir cap.
- Expose the fuse and relay box in the engine compartment
- Remove the rear bench seat
- Open the right-hand fuel sender service lid
- Remove the fuel-tank sending unit in accordance with the manufacturers specifications
- Remove the footwell trim on the driver's side
Remove page 24 "Operating Instructions for End Customer" and insert with vehicle operating instruc-
tions.
1
1311770A_EN

Heater unit installation location

1 Heater unit
1
Opel Corsa
Installa-
tion loca-
tion
5