Webasto Thermo Top Z Operating Instructions

Operating Instructions

Thermo Top Z
Thermo Top E
Thermo Top C
Introduction
Dear Webasto Customer,
Thank you for choosing a Webasto Thermo Top Z, E, or C Water Heater.
We hope you will enjoy many years of additional comfort during your travels with it.
The Thermo Top E and C heaters are used in conjunction with the original vehicle heating
system
– to heat the passenger compartment,
– to defrost the vehicle windows and
– to preheat water-cooled engines.
The Thermo Top Z heater is only used as auxiliary heater for water-cooled engines.
We presume that the principle and mode of operation of your new heater has been explained
to your complete satisfaction by the workshop/service centre which installed the heater. In
these operating instructions we would like to once again provide you with an overview of the
safe use of the heater.
To become familiar with and understand all functions of the heater, you must
read these operating instructions carefully.
Then you can be sure that you can use all functions to your satisfaction and
feel completely comfortable and safe.
If you should loose these instructions, please contact an authorised Webasto
dealer immediately to obtain a replacement copy.
Repair or maintenance work not described here may only be carried out by an
authorised Webasto dealer.
Maintenance and Safety Instructions
Within the territory governed by European Directive 70/156/EEC and/or EC/2007/46 for new
vehicle types from 29/04/2009), there are homologation approvals for the Thermo Top Z, E
and C water heaters in accordance with ECE R-122 (Heatings) and ECE R-10 (EMC).
The heater must not be started until the unit has been checked exclusively by per-
sonnel duly trained by Webasto.
The unit may only be installed professionally in accordance with the installation in-
structions.
1