Panasonic KX-NTV150 User Manual page 69

Image Adjustment
•
Brightness: Adjusts the image brightness level, which ranges from 0%-100%.
•
Contrast: Adjusts the image contrast level, which ranges from 0%-100%.
•
Saturation: Adjusts the image saturation level, which ranges from 0%-100%.
•
Sharpness: Adjusts the image sharpness level, which ranges from 0%-100%.
•
Gamma curve: Adjusts the Gamma curve. The default is Optimize and you can adjust it manually.
•
Defog: Clears images even if the weather is poor, such as when there is smog, fog, or smoke.
•
Enable 3D noise reduction: Check to enable noise reduction in order to reduce noises and flickers in
images. This applies to the onboard 3D Noise Reduction feature. Use the pull-down menu to adjust the
reduction strength. Note that applying this function to the video channel will consume system computing
power.
3D Noise Reduction is mostly applied in low-light conditions. When enabled in a low-light condition with
fast moving objects, trails of after-images may occur. You may then select a lower strength level or disable
the function.
You can click Restore to recall the original settings without incorporating the changes. When completed with
the settings on this page, click Save to enable the setting. You can also click on Profile mode to adjust all
settings above in a pop-up window for special lighting conditions. You may select the scheduled mode to set
the period which you prefer a different lighting and image settings.
2 Software
User's Manual 69