Panasonic KX-NTV150 User Manual page 109

Trigger digital output for seconds
Select this option to turn on the external digital output device when a trigger is activated. Specify the length
of the trigger interval in the text box.
Add server
To set an event that will be recorded in videos or snapshots, it is necessary to configure the server and media
settings so that the KX-NTV150/KX-NTV160 will know what action to take (such as which server to send the
media files to) when a trigger is activated. Click Add server to open the server setting window. You can specify
where the notification messages are sent when a trigger is activated. A total of 5 server settings can be
configured.
There are four choices of server types available: Email, FTP, HTTP, Network storage, and "SIP Outgoing".
Select the item to display the detailed configuration options. You can configure either one or all of them.
Server type - Email
Select to send the media files via email when a trigger is activated.
•
Server name: Enter a name for the server setting.
•
Sender email address: Enter the email address of the sender.
•
Recipient email address: Enter the email address of the recipient.
•
Server address: Enter the domain name or IP address of the email server.
•
User name: Enter the user name of the email account if necessary.
•
Password: Enter the password of the email account if necessary.
•
Server port: The default mail server port is set to 25. You can also manually set another port.
If your SMTP server requires a secure connection (SSL), check "This server requires a secure connection
(SSL)".
To verify if the email settings are correctly configured, click Test. The result will be shown in a pop-up window.
If successful, you will also receive an email indicating the result.
Click Save server to enable the settings.
2 Software
User's Manual 109