Panasonic KX-NTV150 User Manual page 46

2 Software
Go to
If you configured and chose to display a smaller region of interest from out of a maximum image frame, you
can configure different areas within the frame as preset points, and use this menu to move to a location.
Client settings
This section explains how to select the stream transmission mode and saving options on the local computer.
When completed with the settings on this page, click Save on the page bottom to enable the settings.
Note
•
The Client page is not displayed in Mozilla browsers.
H.264 media options
Select to stream video or audio data or both. This is enabled only when the video mode is set to H.264.
H.264 protocol options
Depending on your network environment, there are four transmission modes for H.264 streaming:
UDP Unicast: This protocol allows for more real-time audio and video streams. However, network packets
may be lost due to network burst traffic and images may be broken. Activate UDP connection when occasions
require time-sensitive responses and the video quality is less important. Note that each unicast client
connecting to the server takes up additional bandwidth and the KX-NTV150/KX-NTV160 allows up to ten
simultaneous accesses.
UDP Multicast: This protocol allows multicast-enabled routers to forward network packets to all clients
requesting streaming media. This helps to reduce the network transmission load of the KX-NTV150/
KX-NTV160 while serving multiple clients at the same time. Note that to utilize this feature, the KX-NTV150/
46 User's Manual