Panasonic KX-NTV150 User Manual page 30

1 Operations
2.
Camera control (ePTZ) is available after answering a call and during talking. ePTZ can be controlled
by exclusive software or Dial Key detection. Please see the figure below. It shows the operation and
Dial Key number.
* Door locking depends on the door opener (Digital output) specifications. The Communication IP
Camera cannot lock the door.
Once camera receiving Dial Key, after door opening, conversation will be ended after 8 seconds.
Once receiving Dial Key, camera will not receiving Dial Key until next conversation.
3.
The Communication IP Camera talking ends in following cases.
If talking ends, the video monitoring ends too. The status LED turns on green.
1.
Callee finishes talking with the Communication IP Camera.
Talking ends after ringing re-order tone for 3 seconds after the callee ends talking.
Note
•
2.
Limit of conversation time elapsed from starting the Communication IP Camera call. Talking ends
after ringing re-order tone for 3 seconds.
3.
Pressing the Call button again while talking can end the Communication IP Camera talking.
5.
Control Embedded web menu
Users can operate the door opener (Digital output) from "Home" – "View" of the Embedded web menu.
30 User's Manual
Dial Key 4
Dial Key 7
This behavior depends on embedded web menu settings.
Dial Key 2
Dial Key 8
Dial Key 9
Dial Key 5: Digital Output
Dial Key*: Ending video monitor,
start to talk
Dial Key 6