Panasonic KX-NTV150 User Manual page 66

2 Software
A zoom indicator will be displayed on the Home page when you zoom in/out on the live viewing window as
shown below. You may zoom in/out on the image by scrolling the mouse wheel inside the live viewing window
and the maximum zoom in will be up to 12.5 times.
Video Title
Title and Time
Zoom Factor
Video font (.ttf): Upload the language .ttf file to support display special language on OSD.
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you must
disconnect and reconnect the power cord of the KX-NTV150/KX-NTV160 in order for the new setting to take
effect.
Video orientation: Flip to vertically reflect the display of the live video; Mirror to horizontally reflect the display
of the live video. Select both options if the KX-NTV150/KX-NTV160 is installed upside-down (e.g., on the
ceiling) to correct the image orientation.
Rotate to rotate the live video to 90 degrees and 270 degrees.
Please note that if you have configured preset locations, those locations will be cleared after flip/mirror setting.
Light source LED settings: With the setting "Manual emitting activate" checked, you can manually emit the
Light source LED on the home view page.
CAUTION
•
"Manual emitting activate" settings take priority over "Emitting control after call button pushed" settings.
If you enable "Light source LED settings" on the home view page, you must later turn off "Light source
66 User's Manual
Zoom Out
Zoom In