Panasonic KX-NTV150 User Manual page 63

Day2: Start from 14:00
Night: start from 17:00
Then we can get below time period:
Day1: 9:00~12:00
Lunch: 12:00~14:00
Break: 14:00~16:00
Day2: 16:00~17:00
Night: 17:00~09:00
•
Only Break can set START/END time, it has a higher priority than other periods.
•
SIP outgoing Number of Day/Day2 is the same phone number.
Call ring duration: (10 seconds–150 seconds)
Set the remaining time during outgoing, once exceed the setting, SIP outgoing call will be stopped.
Call duration: (0-300 seconds, 0: No limit)
Set the time during conversation.
Video monitor before answer:
This function is for users who use SIP Video Device and IP Camera/IP Video Doorphone, and is used to
determine if users want to open the door or answer the phone or not by monitoring the video.
For example, if on the side of IP Camera/doorphone, someone presses the call button. At that time, if the callee
hooks off the SIP video device, the callee can monitor the video. However the user at the side of Communication
IP camera/IP Video Doorphone is not aware of that someone is motoring the video, the caller only can hear
the ringback tone until exceed the time of "Call ring duration". Once the callee press Dial Key* on SIP video
2 Software
User's Manual 63