System; General Settings - Panasonic KX-NTV150 User Manual

KX-NTV160 must be configured to enable multicast streaming at the same time. For more information, please
refer to RTSP Streaming on page 84.
TCP: This protocol guarantees the complete delivery of streaming data and thus provides better video quality.
The downside of this protocol is that its real-time effect is not as good as that of the UDP protocol.
HTTP: This protocol allows the same quality as TCP protocol without needing to open specific ports for
streaming under some network environments. Users inside a firewall can utilize this protocol to allow streaming
data through.
MP4 saving options
Users can record live video as they are watching it by clicking Start MP4 Recording on the main page. Here
you can specify the storage destination and file name.
Folder: Specify a storage destination for the recorded video files.
File name prefix: Enter the text that will be appended to the front of the video file name.
Add date and time suffix to file name: Select this option to append the date and time to the end of the file
name.
CLIP_20150625-180853
File name prefix
Date and time suffix
the format is: YYYYMMDD_HHMMSS
Local streaming buffer time
Due to the unsteady bandwidth flow, the live streaming may lag and not be very smooth. If you enable this
option, the live streaming will be stored on the cache memory of the PC having a web session with the
KX-NTV150/KX-NTV160 for a few seconds before being played on the live viewing window. This helps you
see the streaming more smoothly. If you enter 3000 Millisecond, the streaming will delay for 3 seconds.

2.5 System

2.5.1 General settings

This section explains how to configure the basic settings for the KX-NTV150/KX-NTV160, such as the host
name and system time. It is composed of the following two parts: System and System time. When finished with
the settings on this page, click Save at the bottom of the page to enable the settings.
2 Software
User's Manual 47