Network Deployment - Panasonic KX-NTV150 User Manual

1 Operations
KX-NTV160: Press Reset button (A) inside the screw cover for over 30 seconds.
The reset button is used to restore the factory default settings. Sometimes resetting the system can return
KX-NTV150/KX-NTV160 to normal operations. If the system problems remain after reset, restore the factory
settings and install again. Press and hold the reset button until the status LED rapidly blinks with Green 0.25
second On/0.25 second off status. Upon successful restore, KX-NTV150/KX-NTV160 will reboot and all
settings will restore to factory default.

1.6.5 Network Deployment

KX-NTV150 (Communication IP Camera)
When using a non-PoE switch
1.
Connect the camera to a switch via an Ethernet cable or directly to a computer. The Ethernet cable must
be connected before turning on the power.
20 User's Manual
A