Panasonic KX-NTV150 User Manual page 110

2 Software
Note that after you set up the first event server, the new event server will automatically display on the Server
list. If you wish to add other server options, click Add server again.
Server type - FTP
Select to send the media files to an FTP server when a trigger is activated.
•
Server name: Enter a name for the server setting.
•
Server address: Enter the domain name or IP address of the FTP server.
•
Server port: By default, the FTP server port is set to 21. It can also be assigned to another port number
between 1025 and 65535.
•
User name: Enter the login name of the FTP account.
•
Password: Enter the password of the FTP account.
•
FTP folder name: Enter the folder where the media file will be placed. If the folder name does not exist,
the KX-NTV150/KX-NTV160 will automatically create a folder on the FTP server.
•
Passive mode: Most firewalls do not accept new connections initiated from external requests. If the FTP
server supports passive mode, select this option to enable passive mode FTP and allow data transmission
to pass through the firewall. The firmware default has the Passive mode checkbox selected.
To verify if the FTP settings are correctly configured, click Test. The result will be shown in a pop-up window.
If successful, you will also receive a test.txt file on the FTP server.
Click Save server to enable the settings.
110 User's Manual