American Megatrends StorTrends 3600i Setup Manual page 78

Accessing the IPMI Overview
In order to log into the IPMI on both controllers inside your StorTrends storage appliance,
you will need to know at least one of the IPMI IP Addresses of the two controllers.
This document recommends discovering the IP Address of the Left Controller's IPMI.
The reason is the Left Controller is required to be powered on while the Right Controller
is powered off during a reinstallation of the StorTrends software.
Once you get the IPMI's IP Address of the Left Controller, you can access it from an
Internet browser on another system (on the same subnet). There are two methods in
obtaining the IPMI IP Address assigned to the IPMI LAN.
Method 1: Obtaining the IPMI IP Address using ManageTrends
Step 1: Login to ManageTrends
Login to ManageTrends using the alias IP address of the StorTrends Server Appliance.
Please refer Log On Using your Virtual IP Address for more details.
Step 2: Navigate to Control Panel
Click on Control Panel below the specific Controller for which you wish to
obtain/configure the IPMI IP.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide
NOTE:
Page 78