To log into your StorTrends Dual Controller IP-SAN Storage Appliance, you can use any
of the Physical IP Addresses.
In this example, we have two Physical IP Addresses to choose from left controller. We
will use the Left Controller, NIC-1.
Immediately after your initial login attempt, you are taken to the Quick Network
Configuration Wizard. In the Quick Network Configuration Wizard, you must configure
a Physical IP Address and an Alias IP Address for it which is also known as a Virtual IP
Address.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide
Page 32