American Megatrends StorTrends 3600i Setup Manual page 17

Connect dedicated UPS to StorTrends® Storage Appliance
1 Insert the KVM Dongle and connect your UPS to StorTrends Appliance.
A.) USB Ports: Plug the USB cable from the UPS to the USB port of this dongle
B.) Plug this connector into the KVM port on the back of the controller.
2 Automatic UPS Switching M odule (AUSM ) provides continuous monitoring of UPS.
AUSM will be connected to both Left and Right controllers as shown in the picture below using KVM
Dongle. Once connected, user can enable UPS monitoring from UPS configuration page in M anageTrends
under Dashboard.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide Page 17