Using the Storage Wizard
Storage Wizard: Before You Begin
Right most slots will be considered as starting and drive Slot number will begin from 0
to 15.
Use the following instructions as a basis.
The Storage Wizard will select all the physical drives present in the StorTrends Dual
Controller IP-SAN storage appliance to create the RAID array and Storage Pool(s).
Twenty percent of the physically available disk space should be reserved if you are
planning to use snapshot storage.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide
NOTE:
Slot 15 Slot 0
NOTE:
Page 57