American Megatrends StorTrends 3600i Setup Manual page 7

SERVER PRECAUTIONS
1.
2.
3.
4.
5.
6.
7.
8.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide
WARNING!
REVIEW THE GENERA L SAFETY PRECAUTIONS.
DETERMINE THE PLACEMENT OF EACH COMPONENT IN THE RACK
BEFORE YOU INSTALL THE RAILS.
INSTALL THE HEAVIEST SERVER COMPONENTS ON THE BOTTOM
OF THE RACK FIRST, AND THEN WORK UP.
USE A REGULATING UNINTERRUPTIBLE POWER SUPPLY (UPS) TO
PROTECT THE SERVER FROM POWER SURGES, VOLTAGE SPIKES
AND TO KEEP YOUR SYSTEM OPERATING IN CASE OF A POWER
FAILURE.
ALLOW THE POWER SUPPLY UNITS AND HARD DISK DRIVES TO
COOL BEFORE TOUCHING THEM.
ALWAYS KEEP THE RACK'S FRONT DOOR AND ALL PANELS AND
COMPONENTS ON THE SERVERS CLOSED WHEN NOT SERVICING
TO MAINTAIN PROPER COOLING.
WHEN REMOVING THE HARD DISK DRIVE, UNLOCK THE LATCH
AND WAIT APPROXIMATELY ONE MINUTE TO ALLOW THE HARD
DISK DRIVE MOTOR TO STOP BEFORE PULLING THE HARD DISK
DRIVE OUT.
HANDLE THE SSD WITH CARE. DO NOT TOUCH THE GOLD
CONNECTORS.
Page 7