S tep
Action
M ake sure Network Configuration with Team is selected and click Next.
1
2
Select at least two NIC from the list.
In this example, Physical & Virtual IP address and network team will be configured for NIC-1 & NIC-2 from
both controllers.
In this example ideally the User should use the 10Gbps Network connection instead of the 1 Gbps. If the IP
addresses are not listed next to the Network adapter's name, as in case of NIC-5, NIC-6 above, the network
cables are not connected properly. Please check the cables before proceeding with this configuration wizard.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide
Page 34