American Megatrends StorTrends 3600i Setup Manual page 12

Inspection
Remove both the left (marked L) and right (marked R) rack rails from their plastic bags.
Both the left and right rack rails have two sections to them.
•
inner rail
•
outer rail
Rack Rail Sections
Separating the Rail Sections
The inner rack rail needs to be slid out from the outer rack rail prior to installation. To
slide the inner rack rail from the outer rack rail, fully extend the rack rail until the inner
rack rail slides to its locking position.
Rack Rail Release Tab
While lifting the locking tab on the inner rack rail, slide the inner rack rail out from the
outer rack rail.
Inner Rail Fully Released
Attaching the Inner Rack Rails to the Chassis
The inner rack rail has openings that line up with the side of the chassis. Match the inner
rack rail to the appropriate side of the chassis.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide Page 12