S tep
Action
4
Enter the Virtual IP Address that you want to use in the Virtual IP field.
In this example, 10.0.5.51 and 10.0.5.52.
5
M ake sure that the Virtual IP Address that you want to use is in the same subnet as that of physical IP and
should not be used by some other system.
To check click Ping Test. If the PING result is success, a green tick mark will be shown near the IP
addresses as shown below.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide
Page 41