American Megatrends StorTrends 3600i Setup Manual page 69

Field/Button Definition
Volume Name In the Enter Volume Name field, enter a name for your SAN Virtual Volume. The SAN
Virtual Volume Name must be alphanumeric, not have any spaces and be between one and
63 characters in length.
Volume Size In the Enter Volume Size field, enter the size (GB) that you want to use for your SAN Virtual
Volume.
Dialect Type By default, this is set to SAN and cannot be modified.
Provisioning Type By default, this is set to THIN and cannot be modified.
Create New Target The Create New Target field will automatically populate with the created volume name.
The Target Name can be changed if desired. The Target Name must be alphanumeric, not
have any spaces and be between one and 255 characters in length, which includes the base
name. All characters must be lower case to meet iSCSI specifications.
Add to List button This button places the SAN Virtual Volume settings that you want to use into the list. It will
not create the SAN Virtual Volumes until you click Finish.
You can add multiple volumes to list for creation.
In this example, two volumes added to list for creation.
StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide Page 69