5.
Select the device to set up.
6.
Change the settings if necessary, and then click [OK].
Filter Settings
You can set the display alert conditions for printing documents.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Alert Info] from the [Plug-in] menu.
3.
Select [Filter settings].
4.
Click the event button to set up.
5.
Change the setting if necessary.
6.
Click [OK].
Memo
You can register up to 300 senders as E-mail sender.
Checking Logs
Using the event log, you can check whether there are any records about registered printers.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Alert Info] from the [Plug-in] menu.
3.
Select [Display log].
4.
Change the setting if necessary.
5.
Click [Table of number of logs].
324