Using Configuration Tool (Windows Only) - Oki B412dn User Manual

Using Configuration Tool (Windows Only)

Configuration Tool is a utility that enables you to display information about the printer, and change and manage settings. This chapter
describes an overview of Configuration Tool, how to install it, how to set the plug-in, and what you can do with Configuration Tool.
About Configuration Tool
This section describes an overview of Configuration Tool.
Installing Configuration Tool
This section describes how to install Configuration Tool.
Registering or Removing a Printer
This section describes how to register the printer in Configuration Tool when you install the machine for the first time.
Setting the Alert Info Plug-in
This section describes how to display a message on a computer when a print job or another job is complete by using the Alert Info
plug-in.
Setting the Network Setting Plug-in
This section describes how to set the IP address of your printer, enable or disable device settings (Web), and set the display of the
Web page by using the Network Setting plug-in.
Cloning the User Setting
This section describes how to copy user settings to another printer.
Setting the Storage Manager Plug-in
This section describes how to register forms, fonts, and other settings for printing by using the Storage Manager plug-in.
Registering Forms (Form Overlay)
You can register such as logos to the printer as forms, and then print overlays. This section describes how to register forms.
Checking the Free Space in Memory
This section describes how to check the free space in memory by using Configuration Tool.
Deleting Unnecessary Jobs from Memory
You can delete print jobs in memory by using Configuration Tool.
316