If Paper Cannot Be Fed From The Second Tray Unit (Optional) - Oki B412dn User Manual

If Paper Cannot be Fed from the Second Tray Unit (Optional)

To use the second tray unit (optional), you must set the second tray unit with a printer driver.
Note
The second tray unit is displayed as [Optional Tray].
You must log in as the administrator.
The PS printer driver is not available with B412.
Using the Windows PCL Printer Driver
Using the Windows PS Printer Driver
Using the Windows XPS Printer Driver
Using the Mac OS X Printer Driver
Using the Windows PCL Printer Driver
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the [OKI B432] icon, and then select [B432(PCL)] from [Printer properties].
3.
Enter [2] for [Installed Paper Trays] on the [Device Options] tab, and then click [OK].
Memo
If a TCP/IP network connection is used, click [Get Printer Settings] to set the printer driver automatically.
Using the Windows PS Printer Driver
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the [OKI B432] icon, and then select [B432(PS)] from [Printer properties].
3.
Select [2] for [Installed Paper Trays] in [Installable Options] on the [Device Settings] tab, and then
click [OK].
Memo
If a TCP/IP network connection is used, select [Get installed options automatically] in [Installable Options], and then click
[Setup] to set the printer driver automatically.
Using the Windows XPS Printer Driver
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the [OKI B432] icon, and then select [B432(XPS)] from [Printer properties].
3.
Select the [Optional Tray] check box under [Installed Options] on the [Device Options] tab, and then
click [OK].
Memo
If a TCP/IP network connection is used, click [Get Printer Settings] to set the printer driver automatically.
Using the Mac OS X Printer Driver
For Mac OS X, if an option has been added before the printer driver is installed, the device information is automatically obtained. If an
option is added after the printer driver is installed, set the option by following the procedure below.
1.
Select [System Preferences] from the Apple menu.
233