Oki B412dn User Manual page 335

1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Storage Manager] from the [Plug-in] menu.
3.
Click (New Project).
4.
Click (Add File to Project), and then select the created form file.
The form is added to a project.
5.
Click the form file.
6.
Enter the ID in [ID], and then click [OK].
Note
Do not change [Target Volume] and [Local path].
7.
Select the printer in the window at the bottom of the Storage Manager plug-in screen.
8.
Click (Send project file to printer).
9.
Click [OK].
Proceed to "Overlaying Forms or Logos (Overlay Print)" to perform overlay printing.
334