Oki B412dn User Manual page 187

Do not load paper over the "
6.
Open the faceup stacker on the rear of the printer.
Note
Do not open the faceup stacker during printing. Paper jams may result.
7.
Open the faceup stacker.
Papers are output to and stacked in reverse order of printing on the faceup stacker.
8.
Pull the paper support out.
Register the loaded paper in the printer. Proceed to
To set paper on the operator panel and set printing with the printer driver, proceed to
Note
Use paper stored under proper temperature and humidity conditions. Do not use paper that has curled or warped from humidity
(using such paper can cause wrinkles to develop).
Adjust the paper guide and paper stopper so that there is no gap between them and the paper. Do not place the paper too tightly
against the paper guide or paper stopper to avoid bending the paper.
As shown below, the number of sheets of paper (media weight of 80 g/m
the model.
B412, B432, ES4132
Tray1:250 sheets
Tray2:530 sheets
MP Tray:100 sheets
B512, ES5112
" mark.
"Registering the Paper Size, Type, or
"Printing on
2
) that can be loaded in each tray varies depending on
186
Weight".
Envelopes".