Printer Trap - Oki B412dn User Manual

printer trap

Item
Web page Configuration
Tool/Network
Setting plug-in
Printer -
Trap
Community
Name
Trap -
Enable #1
- 5
Printer -
Reboot #1
- 5
Receive -
Illegal
Packet #1
- 5
Online #1 -
- 5
Offline #1 -
- 5
Paper Out -
#1 - 5
Paper Jam -
#1 - 5
Cover -
Open #1 -
5
Printer -
Error #1 -
5
Address -
#1 - 5
Factory Description
default
Network
setting
Card Setup
(Mac OS X)
- public Sets the community name for Printer Trap. You can use up to 31 alphanumeric
characters.
- DISABLE Sets whether to use Printer Trap for TCP #1-5.
- DISABLE Selects whether to send an SNMP message when the printer is restarted.
- DISABLE Sets whether to use Trap when accessing the printer by a community name
that is different from that specified in "Printer Trap Community Name".
- DISABLE Sets whether to send an SNMP message whenever the printer is ON-LINE.
- DISABLE Sets whether to send an SNMP message whenever the printer is OFF-LINE.
- DISABLE Selects whether to send an SNMP message when the printer runs out of paper.
- DISABLE Selects whether to send an SNMP message when there is a paper jam in the
printer.
- DISABLE Selects whether to send an SNMP message whenever the printer cover is
opened.
- DISABLE Selects whether to send an SNMP message when an error occurs in the printer.
- 0.0.0.0 Sets the address to which to send Trap in the case of using TCP/IP. Enter a
value in "***.***.***.***" format by using decimal numbers. If the IP address
is 0.0.0.0, Trap is not sent. You can register up to five addresses.
349