Abbreviated Dialing (Ad) - AT&T Definity 7410 User Manual

Abbreviated Dialing (AD)

To program/reprogram
an AD button
Note: AD buttons must
first be assigned by your
System Manager.
To place an AD call
1 On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program
Note: Each AD button will hold one complete phone
number or feature code.
2 Pick up handset
3 Press [
] (if this button has been assigned to
Program
your voice terminal)
or Dial Program code
Press [ ] to be programmed
4
AD xxxxx
5 Dial outside number, extension, or feature code you
want to program (up to 24 digits)
Note: If you are programming an outside number, be
sure to include a trunk code, if applicable.
6 Press [
] (on the dial pad)
#
Number is stored
Repeat Steps 4-6 to program additional buttons
7 Hang up or press [
Drop/Test
1 Press selected [
AD xxxxx
Call is dialed (silently)
[dial tone]
[dial tone]
[dial tone]
[confirmation tone], [dial tone]
] to end programming
]
[ringback tone]
7