AT&T Definity 7410 User Manual page 5

Line jack
(on back of voice terminal)
Select button
Transfer button
Hold button
Dial pad
Volume control
button
Handset jack
(on back of voice terminal)
Speaker button
Drop/Test button
Conference/Ring
button
Message light
This jack is used for connecting a line cord to your voice
terminal. This jack is labeled "LINE."
When used with [
Conference/Ring
ring from 8 ringing patterns. When used with [
you can test the lights and ringer on your voice terminal.
For transferring a call to another voice terminal.
For putting a call on hold.
The standard 12-button pad for dialing phone numbers
and accessing features. The letters, "Q" and "Z," have
been added to the appropriate dial pad keys for directory
access, and the "5" button on your dial pad has raised
bars for visually-impaired users.
For adjusting the volume of the loudspeaker associated
with the speaker when you are using this feature and a
call is in progress, or for adjusting the volume of the tone
ringer when you are not using the speaker.
This jack is for connecting a handset to your voice
terminal. The jack is labeled
For accessing the Speaker feature. This feature can be
used for listening only. If you want to speak to the other
party, you must lift the handset.
For disconnecting from a call or dropping the last party
added to a conference call. When used with [
you can test the lights and ringer on your voice terminal.
For setting up conference calls. When used with
[ ] , you can select a personalized ring for your
Select
voice terminal.
A red light that goes on steadily when a message has
been left for you.
] you can select a personalized
Drop/Test
.
] ,
Select
2
]