Call Pickup; Conference - AT&T Definity 7410 User Manual

To retrieve a parked call
from any extension

Call Pickup

To answer a call placed to
a member of your pickup
group when your voice
terminal is idle
To pick up a call while
you are active on another
call

Conference

To add another party to a
call (for a total of up to
6 parties)
1 Pickup handset or press [
2 Dial Answer Back code
3 Dial extension number where call is parked
Note: If you receive intercept tone, parked call has
been disconnected or retrieved by someone else.
1 Press [ ]
Call Pickup
or Dial Call Pickup code
Called voice terminal stops ringing
You are connected to ringing call
1 Press [ ]
Hold
Present call is put on hold
Green light flutters
2 Press [ ]
Call Pickup
Called voice terminal stops ringing
You are connected to incoming call
Note: To return to held call after completing pickup
call, press fluttering [
1 Press
[
Conference Ring
Present call is put on hold, and you are given a
new call appearance; all other parties remain
connected to each other
2 Dial number of new party and wait for answer
Note: You can privately discuss the call with the new
party at this time; if no answer or busy, press
fluttering [ ] to return to held call.
xxxxx
3 Press [
Conference Ring
All parties are now connected
Repeat Steps 1-3 for additional conference
connections
]
Speaker Reset Spkr
[dial tone]
[dial tone]
[confirmation tone]
]
xxxxx
[dial tone]
]
] again
12