Send All Calls; Speaker (And Speaker Volume) - AT&T Definity 7410 User Manual

Send All Calls

To send all calls (except
priority calls) immediately
to coverage
To cancel Send All Calls

Speaker (and Speaker Volume)

To place a call without
lifting the handset, or to
use speaker with any
listening-only feature
activity (such as,
monitoring a call on
which you have been put
on hold or for retrieving
messages)
To change from speaker
to handset
1 Press [
Send All Calls
or Dial Send All Calls code
Note: You may hear a ring-ping tone from your voice
terminal as each call is forwarded.
1 Press [
Send All Calls
or Dial Send All Calls Cancel code
1 Press [ ]
Speaker
2 Place call or access selected feature
3 Adjust speaker volume if necessary
To raise the volume, press the right half of the
Volume control button labeled [
to lower the volume, press the left half of the
Volume control button labeled [
(There are 8 possible volume settings.)
1 Lift handset and talk
Speaker turns off when you lift handset.
] (while on-hook)
[confirmation tone]
] again (while on-hook)
[confirmation tone]
] ;
]
18