Disa Tone Selection After The Security Code - Panasonic KX-TA616 Installation Manual

[518]-[519]

[518] DISA Tone Selection after the Security Code

Enables or disables sending a beep after entering the security code. If "Enable" is selected, a
beep is sent when the number entered is the same as one of the security codes assigned in
program [512] "DISA Security Codes".
5
Default
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
[519] DISA OGM Mute Time
Assigns the length of time from answering a call with the DISA feature and sending the
DISA outgoing message or a beep. During the assigned length of time, the system will not
receive DTMF signals.
5
Default
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
4-58
System Programming
1
8
NEXT
Enable
1
9
NEXT
0 second
4.2
SELECT STORE
(Enable/
Disable)
SELECT STORE
(0/2/4/6 sec)
System Programming
END
END