Pause Time - Panasonic KX-TA616 Installation Manual

[414]-[417]
! • You must select "DISA1"when the optional OGM/FAX Detection card is not installed
!
and if you want to use the internal DISA.
• When you select "UCD", assign program [520] "UCD Group" to determine which
extension group is assigned to the UCD group.
• When you select "DISA1", "DISA2" and/or "UCD", assign program [502] "OGM
Selection" to determine which OGM will be used.
• Feature References
Section 3, Features
Direct In Line (DIL), Direct Inward System Access (DISA),
Outgoing Message (OGM), Uniform Call Distribution (UCD)

[417] Pause Time

Assigns the length of the pause time. The programmed pause time is automatically inserted
after a line access code, a host PBX access code programmed in [403] "Host PBX Access
Codes" or a pause code assigned in [311] "Automatic Pause Insertion Codes" or can be
manually inserted by the user using the PAUSE button.
4
* Outside (CO) line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Host PBX Access
4-42
System Programming
1 7
NEXT
All outside (CO) lines – 1.5 seconds
4.2 System Programming
or
PREV
NEXT
outside line no.*
SELECT
(1.5/2.5/
(1···6/ )
3.5/4.5 sec)
SELECT
(All outside lines)
To continue
END
STORE
To continue