While Installing - Panasonic KX-TA616 Installation Manual

2.1 Before Installation
4. Please use one pair telephone wire for extension connection of (telephone) equipment
such as single line telephones, data terminals, answering machines, computers, voice
processing systems, etc., except Panasonic proprietary telephones (e.g. KX-T7330).
5. Unplug the system during wiring. After all of the wiring is completed, plug in the
system.
6. Mis-wiring may cause the system to operate improperly. Refer to Section 6.1 "While
Installing" and Section 6.2 "While Connecting".
7. If an extension does not operate properly, disconnect the telephone from the extension
line and then connect again, or turn off the Power Switch of the system and then on
again.
8. The system is equipped with a 3-wire grounding type plug. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the purpose of the grounding-type plug.
9. Outside (CO) lines should be installed with lightning protectors. For details, refer to
Section 2.7 "Outside (CO) Line Connection", Installing Lightning Protectors.
Warning: Static sensitive connectors
Warning:
Static sensitive devices
are used. To protect
printed circuit boards
from static electricity, do
not touch connectors
indicated to the left. To
discharge body static,
Side View
touch ground or wear a
grounding strap.
* The illustration on this page is a KX-TA308.
2-3
Installation