Pulse Speed Selection - Panasonic KX-TA616 Installation Manual

[402]-[403]

[402] Pulse Speed Selection

Selects a pulse rate for each outside (CO) line which sets "Pulse Mode" or "Call block
Mode" in program [401] "Dial Mode". There are 2 pulse rates, Low Speed (10 pps) and
High Speed (20 pps).
4
* Outside (CO) line number: 1 through 6 /
Default
[403] Host PBX Access Codes
If the system is installed behind a host PBX, each outside (CO) line may require an access
code to make an outside call. Up to 8 access codes can be stored for each outside line.
When the programmed codes are dialed, the pause time assigned in program [417] "Pause
Time" is automatically inserted, and toll restriction is applied after the code.
4
* Outside (CO) line number: 1 through 6 /
1
* 2 Insert a "," for each code using the
Example:
• Access codes 81, 82 on outside (CO) line number 1
4
Default
!
!
• To correct a wrong entry, press the CLEAR button and enter the new one.
• Feature Reference
Section 3, Features
Host PBX Access
4-36
System Programming
0 2
NEXT
All outside (CO) lines – Low Speed
0 3
NEXT
0
3 1 8 1
NEXT
All outside (CO) lines – Not stored
4.2
or
NEXT
outside line no.*
(1···6/ )
(Low/High
SELECT
(All outside lines)
NEXT
outside line no.*
1
(1···6/ )
(All outside lines)
button on the overlay.
,
8 2
, STORE END
System Programming
PREV
To continue
STORE
SELECT
To continue
Speed)
or
PREV
To continue
access code*
2
STORE
Up to 8 access codes
1 or 2 digits
To continue
(0···9)
SELECT
END
END