Disa Busy Mode - Panasonic KX-TA616 Installation Manual

[506]-[507]

[506] DISA Busy Mode

Selects the operation when a called extension or all called extensions in an extension group
enabled in program [100] "Hunting Group Set" via the DISA feature is/are busy.
Disconnect, Call Waiting or DISA2 is available.
Disconnect:
Call Waiting: A call waiting tone is sent to the called extension or first called extension
DISA2:
5
Default
• Program [502] "OGM Mode Selection" should be "MODE2", if "DISA2" was selected in
!
!
this program.
• Feature References
Section 3, Features
Direct Inward System Access (DISA), Outgoing Message (OGM)
[507] DISA Intercept Mode
Selects the operation when a called extension or extension group via the DISA feature does
not answer a call within the length of time programmed in [508] "DISA Ringing Time before
Intercept". Intercept or Disconnect is available.
Intercept: The call is redirected depending on [408]-[410] "Flexible Ringing
Disconnect: The call is disconnected. This is useful for users who do not want to
5
Default
• Feature References
Section 3, Features
Direct Inward System Access (DISA), Intercept Routing, Voice Mail Integration
4-52
System Programming
The call is disconnected after the busy tone.
in the hunting group.
OGM2 is sent to the caller and the system waits for another destination
when the first destination is busy.
0
6
NEXT
Disconnect
Assignment–Day/Night/Lunch" (Intercept Routing – No Answer feature).
This is useful for business use. For example, the call is forwarded to the
operator or a Voice Processing System automatically.
forward the call, for example, to a home.
0
7
NEXT
Intercept
4.2
STORE
SELECT
(Disconnect/
Call Waiting/
DISA2)
STORE
SELECT
(Intercept/
Disconnect)
System Programming
END
END