Toshiba Strata DK24 Installation And Maintenance Manual page 329

BACKGROUND MUSIC SLOT IDENTIFICATION (RELEASE 3 AND HIGHER)
STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 19
Press CR.
3 Enter the number 1.
The present slot number will be displayed.
4 Refer to the record sheet and enter the required slot number.
Example: Slot 04, enter 0 4 CR.
5 To Exit this Program
Press # # CR.
NOTE:
Program 20 uses Type 2 procedure.
STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 21
Press CR.
Refer to the System Record Sheet, and enter the required port
3
number for the PDIU-DS.
Example: Port 04; Enter: 0 4.
4 Press #.
The system will display the presently selected standard telephone
port number.
5 Refer to the System Record Sheet, and enter the required
standard telephone port number.
Example: port 21; Enter: 2 1.
6 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to Step 3 until all Program 21 data
is entered.
C) To exit this program, press # # CR.
REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
TABLE RM-R
PROGRAM 19
ACTION
TABLE RM-S
PROGRAM 21
MODEM POOLING (RELEASE 3 AND HIGHER)
ACTION
>MODE PROG
P
P 19
P19
P19
P19 1 NN
P19 1 NN 04
P19
P1 19 ##
P
>MODE PROG
P
P 21
P21
P21 04
P21 04 # NN
P21 04 # NN 21
P21 04 # NN 21
P21 # #
P
-25-
SECTION 400-096-600
SEPTEMBER 1992
DISPLAY/PRINTOUT
DISPLAY/PRINTOUT