Toshiba Strata DK24 Installation And Maintenance Manual page 322

REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
SECTION 400-096-600
SEPTEMBER 1992
STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 92
Press CR.
3 Enter 9.
4 Enter button/LED number 0 3.
5 Change LED 03 to "ON" by
entering Y.
6 Press SPACE.
7 Change LED 04 to "ON" by
entering Y.
8 Press CR.
Initialization complete.
NOTE: If program data is not entered correctly, CR will
not respond. To retry, press DELETE CR.
9 To exit this program, press # # CR.
This program clears call forward memory for all stations, but does not reset the call forward
indication on the station (call forward LCD information and/or call forward button/LED). To
clear station call forward indications, system power must be turned OFF for five seconds, then
ON. Fixed call forward is not cleared by this program.
TABLE RM-I
PROGRAM 92 (continued)
CALL FORWARD BACKUP RAM INITIALIZATION
ACTION
IMPORTANT NOTE:
>MODE PROG
P 92
P92
P92
P92 9
P92
P92 9 03 N
P92
P92 9 03 N Y
P92
P92 9 03 N Y
P92
P92 9 03 N Y
P92
P92 9 03 N Y
P92
-18-
DISPLAY/PRINTOUT
04 N
04 N Y
04 N Y