Normal Mode; Eco Mode; Battery Mode; Bypass Mode - Eaton 9135 User Manual

Normal Mode

During Normal mode, the
and provides power protection to your equipment.

Eco Mode

During Eco mode, the
Under normal conditions (utility power available), the equipment is supplied in ECO mode.
NOTE ECO mode: operating mode by which the equipment is supplied directly by the
utility power if it is within the tolerances defined by the user.
If utility power is out of tolerance, the
is protected by the UPS.

Battery Mode

When the UPS is operating during a power outage, the alarm beeps once every 10 seconds and the
indicators illuminate. The equipment is protected by the UPS and supplied by the battery. The display
shows the remaining battery backup time.
If battery capacity becomes low while in Battery mode, the alarm beeps every three seconds. Immediately
complete and save your work to prevent data loss and similar difficulties.
When the utility power returns, the UPS transfers to Normal mode operation while the battery recharges.
End of backup time: all indicators turn off. The alarm beeps continuously and the UPS displays End of
backup time Battery low.
When utility power is restored after the UPS shuts down, the UPS automatically restarts.

Bypass Mode

The UPS transfers to Bypass mode when:
The utility power is out of tolerence.
l
There is an overload condition.
l
The button is pressed.
l
There is a malfunction.
l
The and indicators illuminate and the equipment is powered by utility power.
indicator illuminates. The UPS monitors and charges the batteries as needed
indicator illuminates. Eco mode reduces the consumption of electrical power.
indicator flashes and the
Eaton 9135 5000/6000 VA UPS User's Guide 164201726—Rev 4 www.eaton.com/powerquality
indicator illuminates. The equipment
Operation
and
32