Introduction; Description - Eaton 9135 User Manual

Chapter 1

Introduction

Description

The Eaton
electronic equipment from the most common power problems including power failures, power sags, power
surges, brownouts, line noise, high voltage spikes, frequency variations, switching transients, and harmonic
distortion.
Power outages can occur when you least expect it and power quality can be erratic. These power problems
have the potential to corrupt critical data, destroy unsaved work sessions, and damage hardware. This could
cause hours of lost productivity and expensive repairs.
With the Eaton 9135 UPS, you can safely eliminate the effects of power disturbances and guard the integrity
of your equipment. Figure 1 shows the Eaton 9135 UPS.
LCD
Figure 1. Eaton 9135 UPS
Providing outstanding performance and reliability, the unique benefits of the Eaton 9135 UPS include:
Online UPS design with pure sine wave output. The UPS filters and regulates incoming AC power and
l
provides consistent power to your equipment without draining the battery.
Two-in-one form factor for using the UPS in a rack-mount configuration or as a standalone cabinet.
l
Hours of extended runtime with up to four Extended Battery Modules (EBMs) per UPS.
l
Startonbattery capability for powering up the UPS even if utility power is not available.
l
Hotswappable power module and battery tray that simplify maintenance by allowing you to replace them
l
safely without powering down the critical load.
Shutdown control through the remote power-off (RPO) port.
l
Two standard communication options with a USB port and an RS-232 serial port.
l
Advanced power management for graceful shutdowns and power monitoring.
l
Optional communication cards with enhanced communication capabilities for increased power protection
l
and control.
Backed by worldwide agency approvals.
l
® 9135 Two-in-One 5000/6000 VA uninterruptible power system (UPS) protects your sensitive
Eaton 9135 5000/6000 VA UPS User's Guide 164201726—Rev 4 www.eaton.com/powerquality 1