Rc Components; Get The Model Ready To Fly; Check The Control Directions; Balance The Model (C.g.) - Hobbico Flitework Extra 300LP FLWA4003 Building And Instruction Manual

RC COMPONENTS

Der 6s 4000 Akku lässt sich mit Akkubändern (BestNr.: 008-
502) sicher im Bug des Rumpfes verankern. Wir empfehlen
unter dem Akku eine Antirutschmatte mit doppelseitiger
Klebefolie zu befestigen.
Vor dem Seitenruderservo ist ausrei-chend Platz, die
Empfangsanlage unterzubringen. Für die Querruderservos
sind zwei Servokabelverlängerungen von 10 cm Länge
ausreichend.

GET THE MODEL READY TO FLY

CHECK THE CONTROL DIRECTIONS

❏ 1. Turn on the transmitter and receiver and center the
trims. If necessary, remove the servo arms from the servos and
reposition them so they are centered. Reinstall the screws that
hold on the servo arms.
❏ 2. With the transmitter and receiver still on, check all the
control surfaces to see if they are centered. If necessary, adjust
the clevises on the pushrods to center the control surfaces.
12
4 CHANNEL RADIO SETUP
MODE 1
RUDDER
MOVES
RIGHT
ELEVATOR
MOVES DOWN
4 CHANNEL RADIO SETUP
MODE 2
RIGHT AILERON MOVES UP
LEFT AILERON MOVES DOWN
ELEVATOR
MOVES DOWN
❏ 3. Make certain that the control surfaces and the carburetor
respond in the correct direction as shown in the diagram. If any
of the controls respond in the wrong direction, use the servo
reversing in the transmitter to reverse the servos connected to
those controls. Be certain the control surfaces have remained
centered. Adjust if necessary.

BALANCE THE MODEL (C.G.)

More than any other factor, the C.G. (balance point) can
have the greatest eff ect on how a model fl ies and may
determine whether or not your fi rst fl ight will be successful.
If you value this model and wish to enjoy it for many fl ights,
DO NOT OVERLOOK THIS IMPORTANT PROCEDURE. A
model that is not properly balanced will be unstable and
possibly unfl yable.
RIGHT AILERON MOVES UP
LEFT AILERON MOVES DOWN
CARBURETOR WIDE OPEN
RUDDER
MOVES
RIGHT
CARBURETOR WIDE OPEN