Download Print this page

Removing And Refitting The Cover - BESAFE iZi Modular i-Size User Manual

Hide thumbs Also See for iZi Modular i-Size:

Advertisement

12

Removing and refitting the cover

• Do take care when you remove the cover, as re-fitting the cover is
done in reverse.
• The cover of the head rest can be taken off separately by
disconnecting the beads at the back and pulling off the fabric
towards the front.
! Warning: potential misuse
• The child seat MUST NOT be installed in a front
passenger seat WITH AN ACTIVATED AIRBAG.
• The floor support must always be used. Make sure that
the floor support is fully pushed down.
• When used in combination with iZi Modular the front brace must be
fitted on the base.
• Make sure the indicators are green before you drive.
Guarantee
• Should this product prove faulty within 24 months of purchase
due to materials or manufacturing fault, except covers and harness
straps, please return it to the original place of purchase.
• The guarantee is only valid when you use your seat appropriately
and with care. Please contact your retailer, they will decide if the
seat will be returned to the manufacturer for repair. Replacement
or return cannot be claimed. The guarantee is not extended
through repair.
• The guarantee expires: when there is no receipt, when defects are
caused by incorrect and improper use, when defects are caused by
abuse, misuse or negligence.
13

Hide quick links:

Advertisement

loading