BESAFE IZI COMBI ISOFIX User Manual
Rearward- & forward-facing
Hide thumbs
Also See for IZI COMBI ISOFIX:
- User manual (24 pages) ,
- Manual (5 pages) ,
- User manual (11 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for BESAFE IZI COMBI ISOFIX
Summary of Contents for BESAFE IZI COMBI ISOFIX
- Page 1 REARWARD- & FORWARD-FACING USER MANUAL ECE R44 04 GROUP WEIGHT 0+/1 0-18 kg 6m-4y...
-
Page 2: Table Of Contents
It is important that you read this user manual BEFORE installing • iZi Combi ISOfix can be installed forward-facing with a 3-point car your seat. Incorrect installation could endanger your child. belt, approved to UN/ECE Regulation No. 16 or other equivalent standards. -
Page 3: Preparing To Install
Preparing to install Rearward-facing: ISOfix installation Crucial parts • It is NOT ALLOWED to mount the seat in a front Release handle head rest passenger seat WITH AN ACTIVATED AIRBAG. Belt clamp (2x) • The seat can only be installed rearward-facing in Adjustable head rest vehicles equipped with ISOfix anchorage points. - Page 4 Install the front brace by sliding the two pins in the holes of Place the seat sideways into the car with the front brace the belt guiding hook. Move the front brace inwards with the towards you. ratchet, not further than the stop sign. The ratchet is used to Turn the seat into the right position (with the front brace adjust the front brace in both directions.
-
Page 5: Removing The Seat
15- Move the front brace outwards • Make sure the floor support is fully pushed down, in with the ratchet. Continue contact with the floor of the vehicle, and locked. (10) tightening until the brace is • Make sure all ISOfix indicators are green before you drive. pressed well into the back rest of the vehicle seat (10). -
Page 6: Forward-Facing Belt Installation
Forward-facing belt installation Put the shoulder belt through the belt clamps. Make sure the belt is It is NOT ALLOWED to mount the seat in a front not twisted (18). passenger seat WITH AN ACTIVATED AIRBAG. Push the seat firmly into the car seat. When mounting in the back seat of the vehicle, push the front seat of the vehicle forward as much Tight installation is most important... -
Page 7: Positioning Of The Child
Positioning of the child Position the shoulder straps (23) over the orange marking at Position of the shoulder straps: too high (20) sides of the seat to keep the Check that the shoulder strap harness open while you position slots are levelled with your child’s the child (23). -
Page 8: Removing And Refitting The Cover
Removing and refitting the cover Refit the cover • Make sure that the harness straps are fixed in the right way, Pull the head rest in the highest position. Mount the head rest after fitting the cover. cover and connect the hooks at the back side. Pull the harness straps through the holes. -
Page 9: Cleaning Instructions
Cleaning instructions • DO NOT use the seat without floor support when mounted rearward-facing. • The cover of the seat must be washed according to the instructions on the inside of the cover (29). (29) wash with similar colours • DO NOT use any aggressive cleaning products;... -
Page 10: Important Advice
DO NOT use at home. It has not been designed for home use • The BeSafe iZi Up is a group 2/3 seat which can be used for and can only be used in a vehicle. children from 15 till 36 kg, which covers the age group from •... -
Page 11: Guarantee
Guarantee • All BeSafe products are carefully designed, manufactured and tested. All of our BeSafe child seats are tested periodically out of our continuous production in our test laboratory. Furthermore they are tested by independent test institutes. • Should this product prove faulty within 24 months of purchase...