Download Print this page

Positioning Of Child - BESAFE iZi Modular i-Size User Manual

Hide thumbs Also See for iZi Modular i-Size:

Advertisement

6
10
click!
7
11
2
3
1
12
8
9
13
15
1
2
3
17
click!
14
8
Thank you for choosing BeSafe iZi Modular (RF)
! It is important that you read this user manual BEFORE
16
installing your seat. Incorrect installation could endanger
your child.
! Vital information
• The child seat MUST NOT be installed in a front
passenger seat WITH AN ACTIVATED AIRBAG.
• iZi Modular can only be installed on the iZi Modular
i-Size base.
• iZi Modular is approved rearfacing for children with a stature
height from 61 to 105 cm, with a maximum weight up to 18 kg and
forward facing for children with a stature height from 88 to 105 cm
with a maximum weight up to 18 kg.
• iZi Modular RF is approved rearfacing for children with a stature
18
height from 61 to 105 cm, with a max. weight up to 18 kg.
• Important: Do not use forward facing before the child is over
15 months.
• BeSafe recommends to use the seat for as long as possible in the
rearfacing position.
• The harness straps must always be locked when the child is in
the seat.
• The harness straps must be tightened without slack and not
twisted.
• The shoulder pads contain magnets. Magnets can influence
electronic equipment such as pacemakers.
• Protect any part of the child's body which is exposed to the sun.
• We recommend that this seat is used only for children who can sit
upright, usually not younger than 6 months.
• Remove the extra seat cushion when the child is over 2 years.
• Remove the extra side supports when the child is over 2 years
or earlier when the child does not fit between these side
supports anymore.
• When the child weighs over 18 kg or the shoulder height exceeds
above the highest position of the shoulder straps, the child must
change to a seat suitable for children with a weight above 18 kg.
• After an accident, the seat must be replaced. Although it may
look undamaged, if you were to have another accident, the seat
may not be able to protect your child to the level to which it
was designed.
9
• Prevent the seat from becoming trapped or weighed down by
luggage, seats and/or slamming doors.
• Make sure you can fit no more than one finger between the harness
and your child (1 cm).
• DO NOT attempt to dismantle, modify or add any part to the seat.
Warranty will be void if non-original parts or accessories are used.
• Never leave your child unattended in the seat.
• Make sure all passengers are informed about how to release your
child in case of emergency.
• Make sure luggage or other objects are properly secured. Unsecured
luggage may cause severe injuries to children and adults in case of
accidents.
• Never use the seat without the cover. The cover is a safety feature
and may only be replaced by an original BeSafe cover.
• Do not use any aggressive cleaning products; these may harm the
construction material of the seat.
• BeSafe advises that child seats should not be bought or sold
second-hand.
• KEEP this user manual for later use with the seat.
• DO NOT use the seat for longer than 7 years. Due to ageing, the
quality of the material may change.
• DO NOT use at home. It has not been designed for home use and
can only be used in a vehicle.
• When the child seat is mounted in the car check all the areas where
the child seat might touch the interior. We recommend using a
(BeSafe) protection cover in these places to avoid cuts, marks or
discolouration to the interior of the vehicle, especially in vehicles
with leather or wooden interiors.
• If in doubt, consult either the car seat manufacturer or the retailer.

Hide quick links:

Advertisement

loading