Positioning The Child; Sleeping Position; Removing And Refitting The Cover; Cleaning Instructions - BESAFE iZi Kid i-Size User Manual

Positioning the child

1. Position of the shoulder straps: Check that the shoulder
strap slots are level with your child's shoulders.
• Too high (39)
• Correct (40)
2. The height of the shoulder straps and the head rest can be
adjusted by pulling the release handle upwards at the back
of the head rest and pulling the head rest up or down while
keeping the head rest upright. (41)
3. Pull the shoulder straps up while pressing the button of the
central adjuster. (42)
4. Open the harness buckle.
5. Position the shoulder straps over the orange marking at
sides of the seat to keep the harness open while you position
the child. (43)
6. When the child is positioned, place the shoulder straps over
the child's shoulders and close the buckle: CLICK! (44)
7. Pull the harness strap through the central adjuster in the
direction of the arrow straight up/forwards. Continue pulling
until the harness is a comfortable but firm fit. (45)
! Make sure that the harness straps are always locked and
tightened when the child is in the seat.

Sleeping position

• The seat has 3 positions.
• By pulling the recline lever upwards, the seat can be
adjusted into another position. (46)
14

Removing and refitting the cover

Removing the cover
• Do take care when you remove the cover, as fitting the cover is
done in reverse.
• Start taking off the lower seat part. (47)
• The cover of the head rest can be taken off separately by
disconnecting the hooks at the back and pulling off the fabric
towards the front.
Refit the cover
• Pull the head rest in the highest position. Replace the head rest
cover and reconnect the hooks at the back side. Pull the harness
straps through the holes. Connect the loose lower part of the
head rest fabric with the plastic part below the head rest.
• Refit the top part and then the shoulder parts. Refit the
seat part and bring the seat cover under the rear parts of
the sidewalls.

Cleaning instructions

• The cover of the seat must be washed according to the
instructions on the inside of the cover.
• DO NOT use any aggressive cleaning products; these may harm
the construction material of the seat.
15