No. 16 or other equivalent standards. It is important that you read this user manual BEFORE installing • iZi Comfort is approved in group 1, forward-facing from 9-18 kg. your seat. Incorrect installation could endanger your child. • The harness straps must always be locked when the child is in the seat.
Preparing to install Forward-facing belt installation Crucial parts It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. Release handle head rest Belt clamp (2x) When mounting in the back seat of the vehicle, push the Adjustable head rest front seat of the vehicle forward as much as possible.
Removing the seat Put the shoulder belt through the belt clamps. Make sure the belt is Loosen the tension in the car belt by releasing the belt not twisted (4). tensioner. Push the seat firmly into the car If the seat is installed in the back seat of the vehicle, push seat.
Pull the shoulder straps up while Pull the harness strap through pressing the button of the central the central adjuster in the (11) adjuster (8). direction of the green arrow straight up-/forwards. Continue pulling until the harness is a comfortable but firm fit. The belt tension indicator will show green (11).
Removing and refitting the cover Refit the cover • Make sure that the harness straps are fixed in the right way, Pull the head rest in the highest position. Mount the head rest after fitting the cover. cover and connect the hooks at the back side. Pull the harness straps through the holes.
• Do not use any aggressive cleaning products; these may harm the construction material of the seat. • BeSafe advises that child seats should not be bought or sold (16) second-hand. • KEEP this user manual for later use with the seat.
Regulation No.16 or other equivalent standards. Next car seat • The BeSafe iZi Up is a group 2/3 seat which can be used for children from 15 till 36 kg, which covers the age group from 4 till 12 years.
Page 9
9-18 kg 04443620 HTS BeSafe as N-3535 Krøderen, Norway - www.besafe.eu...