Thank you for choosing BeSafe iZi Sleep Vital information BeSafe has developed this seat with much care, to protect your • It is NOT ALLOWED to mount the seat in a front child during the first phase of her or his life.
Preparing to install Rearward-facing belt installation Crucial parts • It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. Carrying handle Sun canopy 1- Position the seat on the vehicle Head rest seat. Make sure the carrying Shoulder straps (2x) handle is in the carrying Upper cover...
Follow the blue indications on from the buckle and remove the belt from the belt guide. the seat. Tighten the 3-point belt around the iZi Sleep (3). Positioning the child • To position your child, you can fold the carrying handle behind the seat, by pressing both handle release buttons.
(9). sun canopy. Sleeping position • Your child can comfortably rest and sleep in the iZi Sleep when you position it in the sleeping position (only outside the car). To put the iZi Sleep into the sleeping position, push both...
Using the iZi Sleep with a stroller Removing and refitting the cover • The iZi Sleep can be installed on a range of strollers. For a Removing the cover complete list check www.besafe.eu • Pay attention when you remove the cover, as fitting the cover click! is done in the opposite way.
• Hip belt between the base and the lower seat shell. • Shoulder belt around the seat shell. Belt through the belt slot • DO NOT use the iZi Sleep with the carrying handle in carrying only at the side of the buckle.
• Do not use any aggressive cleaning products; these may harm the construction material of the seat. Notice for REARWARD-FACING installation • BeSafe advises that child seats should not be bought or sold • This is a universal Child Restraint System. It is approved second-hand.
Page 9
0-13 kg 04443548 HTS BeSafe as N-3535 Krøderen, Norway - www.besafe.eu...