Removing The Seat; Positioning The Child; Sleeping Position - BESAFE iZi Plus User Manual

Removing the seat

1. If the seat is installed in the back seat of the vehicle, push the
front seat of the vehicle forward as much as possible.
2. Move the front brace inwards with the ratchet.
3. Move the floor support to the highest position.
4. Release the anchor belts.
5. Remove the car belt from the front brace and the seat base.
6. Pull the seat back towards the front. Turn the seat so you can
easily remove the seat.
7. Remove the anchor belts from the vehicle.
14

Positioning the child

1. Position of the shoulder straps: Check that the shoulder strap
slots are leveled with or or a bit under your child's shoulders.
• too high (32)
• correct (33)
2. The height of the shoulder straps and the head rest can be
adjusted by releasing the release handle at the back of the
head rest and pulling the head rest up or down while keeping
the head rest upright. (34)
3. Pull the shoulder straps up while pressing the button of the
central adjuster. (35)
4. Open the harness buckle.
5. Position the shoulder straps over the orange marking at sides
of the seat to keep the harness open while you position the
child. (36)
6. When the child is positioned, place the shoulder straps over
the child's shoulders and close the buckle: CLICK! (37)
7. Pull the harness strap through the central adjuster in the
direction of the green arrow straight up-/forwards. Continue
pulling until the harness is a comfortable but firm fit. (38)
!
• Make sure that the harness straps are always locked and
tightened when the child is in the seat.
• Remove the baby cushion (extra available accessory) when the
child is older then 1 year.
• Remove the body hugger when the child is older then 2 years.

Sleeping position

• The seat has 3 positions.
• By pulling the reclining lever upwards, the seat can be put in
another position. (39)
15