Repeater Support; Restoring The Base Station To The Factory Settings - Siemens Gigaset S680 Instruction Manual

Base station settings

Repeater support

With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
Eco mode is disabled.
¢ ¢ ¢
Base
v
¢
Repeater Mode
§Yes§
Press the display key.
When repeater mode is active, the menu
item is marked with
Please note:
Repeater support and eco mode (see page 13)
rule each other out, i.e. both functions cannot
be used at the same time.
Restoring the base station to
the factory settings
When the settings are restored
u
eco mode is disabled,
u
handsets are still registered,
u
the system PIN is not reset.
¢ ¢ ¢
Base
v
Enter the system PIN and press
~
§OK§
.
§Yes§
Press the display key.
Cancel the restoring process by pressing
a or the display key
Press and hold (idle status)
a
58
Add. Features
‰
.
Base Reset
§No§
.