Base Station Settings; Protecting Against Unauthorized Access; Activating/Deactivating Music On Hold; Repeater Support - Siemens Gigaset SL78H User Manual

Gigaset SL785 / EN-US / A31008-M2009-XXXX-1-XX / registr_sett.fm / 09.01.2009

Base station settings

Base station settings
The base station settings are carried out
using a registered Gigaset SL78H handset.
Protecting against unauthorized
access
Protect the system settings of the base sta-
tion with a PIN known only to you. The
system PIN must be entered when, for
example, registering/deregistering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN pre-
set on the base station (default setting:
0000) to a 4-digit PIN known only by you.
Gigaset SL785: Setting a system PIN facili-
tates remote operation of the answering
¢
machine
Ï
¢
v
~
~
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the Registration/Pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
The base station has now been reset, and
the system PIN 0000 set.
Please note
All handsets are deregistered and must
be reregistered.
56
page 40.
¢ ¢
System System PIN
Enter the current system PIN
and press .
§OK§
Enter your new system PIN
and press .
§OK§
Activating/deactivating music
on hold
Ï
¢ ¢
v
Audio Settings
¢
Music on Hold
Press to activate or deactivate the
§Change§
music on hold (³ = on).

Repeater support

With a repeater, you can increase the
range and reception strength of your base
station. You must activate repeater mode.
This will terminate any calls that are in
progress.
Requirement: A repeater is registered.
Eco mode is deactivated.
Ï
¢ ¢ ¢
v
System
Press to deactivate repeater mode
§Change§
(³= on).
Please note
Repeater support and Eco mode
¢
( page 42) cancel each other out,
meaning both functions cannot be
used at the same time.
Restoring the base station to the
factory settings
When the settings are restored
u
Date and time will be retained
u
Eco mode is deactivated
u
Handsets are still registered
u
The system PIN is not reset
Ï
¢ ¢ ¢
v
Reset
~
Enter the system PIN and
press .
§OK§
Press the Display key.
§Yes§
Repeater Mode
Base Reset