Setting Your Own Area Code; Restoring The Handset To The Factory Settings - Siemens Gigaset S680 Instruction Manual

Handset settings
Rejecting/accepting an unregistered
Bluetooth device
If a Bluetooth device that is not registered
in the list of known devices tries to con-
nect with the handset, you will be
prompted on the display to enter the PIN
for the Bluetooth device (bonding).
u
Reject
§Go Back§
Press the display key.
u
Accept
Enter the PIN for the Bluetooth
~
device you want to accept and
§OK§
press
If you have accepted the device, you
can use it temporarily (i.e. as long as it
is within receiving range or until you
deactivate the handset) or save it to the
list of known devices.
Once the PIN has been confirmed, save
to the list of known devices:
§Yes§
– Press the display key
§No§
– Press the display key:
use temporarily.
Changing the Bluetooth name of the
handset
You can change the handset name used to
identify it on the display of another Blue-
tooth device.
¢ ¢
Data Transfer
v í
¢
Own Device Name
§Change§
Press the display key
Change name
~
§Save§
Press the display key
Back: Press and hold key.
a
56
.
¢
Bluetooth

Setting your own area code

In order to transfer phone numbers
(for example vCard), it is essential that
your area code (international and local
area code) is saved on the phone.
Some of these numbers are already pre-
set.
¢ ¢
Handset
v
Check that the (pre)set area code is cor-
rect.
¤
Change multiple line input:
Select/change input field.
q
Navigate in the input field.
r
If necessary, delete number:
X
press the display key.
Enter number.
~
§Save§
Press the display key.
Example:
Area Codes
International code:
00 - 44
Local area code:
0 - [ 20 ]
X
Save
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the call-by-call list, the call
history, the SMS lists and the handset's
registration to the base station as well as
the content of Resource Directory are
retained.
¢ ¢
Handset
v
§Yes§
Press the display key.
Press and hold (idle status).
a
¢
Area Codes
¢
Reset Handset